SE Digest 178

Type S Full Voltage Contactors and Starters

Starters, Type S

Class 8536 / Refer to Catalog 8502CT9701

www.se.com/us

3-Pole Polyphase—NEMA 7 & 9 and 12/3R NOTE: In Table 16.89, replace ●●● with the voltage code shown in .

For information on field modification of NEMA 12 enclosures, see page 16-112. For Form H30• (special lower-FLA factory-assembled starter combinations with Motor Logic SSOLR protection), see Solid-State Overload Relay Forms, page 16-119.

Table 16.89: 3-Pole Polyphase—600 Vac Maximum—50–60 Hz [15]

NEMA7&9 For Hazardous Locations Div. 1 & 2 Class I–Groups C, D Class II–Groups E, F, & G

NEMA Size 16 NEMA AND DEFINITE PURPOSE CONTACTORS AND STARTERS Continuous Current Ratings

NEMA12/3R [16] Dusttight & Driptight Industrial Use Enclosure

Motor Voltage

Max. Hp

Bolted Type

SpinTop™ Type

Cast Iron [17]

Type

Cast Aluminum [18]

200 230 460 575 200 230 460 575 200 230 460 575 200 230 460 575 200 230 460 575 200 230 460 575 200 230 460 575 200 230 460 575 200 230 460 575

1.5 1.5

00

9

UseSize0

UseSize0

UseSize0

2 2 3 3 5 5

SBT2●●●H30 [19]

SBT42●●●H30 [19]

SBR2●●●H30 [19]

SBA2●●●H30 [19]

0

18

7.5 7.5 10 10

SCT3●●●H30 [19]

SCT43●●●H30 [19]

SCR3●●●H30 [19]

SCA3●●●H30 [19]

1

27

10 15 25 25 25 30 50 50 40 50

SDT1●●●H30 [19]

SDT41●●●H30 [19]

SDR1●●●H30 [19]

SDA1●●●H30 [19]

2

45

3

90

—

SET43●●●H30

SER3●●●H30

SEA1●●●H30

4

135

—

SFT41●●●H30

SFR1●●●H30

SFA1●●●H30

100 100 75 100 200 200 150 200 400 400 – 300 600 600

5

270

—

—

—

SGA1●●●H30

6

540

—

—

—

SHA2●●●H30

—

—

—

SJA2●●●H30

7

810

Table 16.90: Coil Voltage Codes Voltage

Schneider Electric offers express shipping for factory modified NEMA Type 1 and Type 12/3R Enclosed Starters. When you need them fast, our Laser™ Delivery program is the answer to getting your product when you need it most. Ask for Laser™ Delivery, then select the product and the modifications you need when you place your order. It’s as easy as that!

Code

60Hz 24 [20] 120 [21] 208 240 277 480 600 Specify

50Hz

— 110 — 220 —

V01 V02 V08 V03 V04 V06 V07 V99

440 550 Specify

NOTE: For voltage codes used with control transformers, see page 16-118. Form S (separate control) is used when a separate source of power is available for

the control (coil) voltage. Dimensions: page 16-39 Factory Modifications (Forms): page 16-117 Separate Enclosures (Class 9991): page 16-110 Replacement Parts (Class 9998): page 16-122 Type S Accessories (Class 9999): page 16-125 For How to Order Information, see page 16-28.

[15] To order melting alloy overload relay, remove form "H30" from part number. [16] NEMA 12 enclosures can be field modified for outdoor non-corrosive and non–service entrance rated applications. [17] Limited to one pilot light, and a selector switch or Start-Stop push button. [18] NEMA 7 and 9 bolted cast aluminum are not UL listed.

[19] FormH30 , with the possibility of a fourth character to select a lower FLA range (for example, H308 ). See “Solid-State Overload Relay Forms” on page 16-119 [20] 24 V coils are not available on Sizes 4–7. On Sizes 00-3, where 24 V coils are available, FormS (separate control) must be specified (i.e., order as 8536SBO2V01S). [21] 120 V Polyphase contactors are wired for separate control. FormS (separate control) must be specified (i.e., order as 8536SCO2V02S).

16-34

© 2019 Schneider Electric All Rights Reserved

11/20/2019