Square D Digest 179

Protection Components

TeSys™ T Motor Management System

Refer to Catalog MKTED210011EN

www.se.com/us

Components

LTME Expansion Module The expansion module adds the following functionalities to the TeSys T controller: • voltage measurement between phases up to 690 V nominal • 4 additional inputs Inputs • 4 discrete logic inputs (isolated) • 2 types of power for the inputs: 24 Vdc and 100 to 240 Vac • A 24 Vdc LTMR controller can be assembled with a 240 Vac expansion module and viceversa The LTMVE must be connected to the LTMR controller by a connecting cable. HMI—Human Machine Interface Depending on the application, two types of HMI can be used with the motor management system. • The LTMCU operator control unit: – Control/monitoring of a 1 to 1 LTMR controller • A Magelis XBTN410 terminal – Control/monitoring of 1 to 8 LTMR controllers • Local control of the motor via the local control interface (keys can be customized) • Three different languages can be loaded into the LTMCU controller at the same time: English, French, Spanish are the defaults. A language download utility (LangTool), together with all the other languages, are available on the website www.schneider-electric.com. This tool allows the languages present in the LTMCU control until to be adapted. The LTMCU HMI control unit has an additional front panel RJ45 port, protected by a flexible cover. Magelis™ Display Two applications have been predefined for the TeSys T controller. Depending on the application loaded, the HMI terminal makes it possible to: • Configure and monitor a motor starter (LTM_1T1_V1.dop) • Monitor and modify certain parameters up to 8 motor starters (LTM_1T8_X_V1.dop) Vijeo Designer programming software is needed for loading applications into the XBT HMI terminal. LTMCU Compact Display • Configure the parameters • Display information • Monitor the alarms and detected faults

LTMEV40FM 16 NEMA AND DEFINITE PURPOSE CONTACTORS AND STARTERS Table 16.278: Expansion Module Input Control Voltage Numberof Inputs Supply to the Electronics

Catalog Number

LTMEV40BD LTMEV40FM

24Vdc

4

via the LTMR controller

100–240 Vac 4

LTM9KCU (Holder Only)

LTMCU

Magelis Display Table 16.279: HMI Modules and Software Description

Supply Voltage Catalog Number

via the LTMR controller

Operator Control unit Holder for LTMCU (with magnetic back)

LTMCU

—

LTM9KCU XBTN410

Magelis compact display 24 Vdc Configuration software Windows 99, 2000, XP —

VJDSNDTMSV13M

16-106

© 2024 Schneider Electric All Rights Reserved