Square D Digest 179

Powerlink Lighting Control Products Refer to Powerlink Intelligent Panelboards

Powerlink™ Lighting Control Systems

www.se.com/us

Powerlink Automated Lighting and Load Control - Factory Assembled System SE advantage may be used to select 120 Vac, 240 Vac or 480Y/277 Vac Powerlink intelligent lighting control systems: • Select system type and interior size from Table 9.90 , page 9-39. All Powerlink panels are furnished with either 1 or 2 control bus strips. • All Powerlink panels use NF type panelboard interiors, boxes, and trims and are suitable for 120 Vac, 240 Vac or 480Y/277 Vac systems. • Select branch circuit breaker requirements. Powerlink panels can accommodate both ECB-G3 remotely operated circuit breakers and EDB, EGB and EJB standard branch circuit breakers. • Refer to panelboard section for additional panelboard accessories. Powerlink 3500 level system with 250 A MLO panelboard rated for 208Y/120 Vac, 3Ø4W, 10kAIR, Type 1, surface mount with ground bar and (12) 20 A 1-pole bolt-on remote operated circuit breakers. Table 9.90: Item PageNo. System Type: 3500 controller with 12 ckt bus page9-40 Panel type: 250 A MLO page9-23 Branch circuit breakers: (12) 20 A 1-pole page9-39 Groundbar page9-28 Table 9.91: NF3500G4 Controller Feature Quantity Available [1] • For complete price, order by description. • Apply appropriate discount schedule. 240 Vac Factory Assembled System Example:

9 PANELBOARDS

Inputs 2 -wire

16

2 - wire with status feedback [2]

8 8 4

3 -wire

Analog Inputs available Time Scheduler Independent schedules ON-OFF periods/schedule Special events/holiday periods Automatic daylight savings Network Variables Communications inputs accessible Remote sources (per controller) Sunrise/sunset tracking

64

999

64

Up to eight panels can be controlled from a single controller.

X X

256 128 256

Maximum subscriptions

Zones Maximum number

256

Maximum number of sources per zone

4

Maximum number of remotely operated circuit breakers (per subnet)

168

Networking RS-232 port/RS-485 port Ethernet (100BaseT port) Protocols Modbus™ ASCII/RTU

X X X X X X

ModbusTCP

BACnet/IP, BACnet MS/TP

DMX512

Powerlink™ ECB-G3 Circuit Breakers

Table 9.92: ECB-G3 Circuit Breakers Bolt-On Remotely Operated

Two-Pole 480Y/277 Vac – 14,000 AIR 120/240 Vac – 65,000 AIR 240 Vac – 14,000 AIR Ground B Phase

One-Pole 27 7 Vac – 14,000 AIR 120 Vac – 65,000 AIR

Three-Pole 480Y/277 Vac – 14,000 AIR 240 Vac – 42,000 AIR

Ampere Rating

ECB14015G3 [3] ECB14020G3 [3] ECB14030G3

ECB24015G3 [3] ECB24020G3 [3] ECB24030G3

ECB34015G3 [3] ECB34020G3 [3] ECB32030G3 [4]

15 20 30

Table 9.93: ECB-G3 Circuit Breakers for Emergency Lighting (requires 2-pole spaces) Ampere Rating

One-Pole 480 Y/277 – 14,000 AIR 240 V – 65,000 AIR

20 ECB142020G3EL NOTE: All are listed as HACR type for use with air conditioning, heating and refrigeration equipment having motor group combinations and marked for use with HACR type circuit breakers. UL listed as HID rated for use with high intensity discharge lighting systems. (1) #10–8 Al or (1) #12–8 Cu. Suitable for use with 75°C conductors.

ECB-G3 Circuit Breakers

X = Supported feature.

[1] [2] [3] [4]

7.5 mA maximum load per input terminal. UL listed as SWD (switching duty) rated. Rated for 240 Vac only – 42,000 AIR

9-39

© 2024 Schneider Electric All Rights Reserved