Square D Digest 179

Powerlink™ Lighting Control Systems

Powerlink Lighting Control Products Refer to Powerlink Intelligent Panelboards

www.se.com/us

Powerlink™ Intelligent Lighting Control Systems Powerlink intelligent lighting control systems are ideally suited for controlling lighting and other loads in commercial, institutional, and industrial facilities. Such systems are typically used to lower utility cost by switching branch circuits OFF during non-occupied periods when lighting is unnecessary or during peak demand periods when a partial reduction in load can save significant money. These systems utilize remotely operated circuit breakers to switch branch circuits ON and OFF via a time schedule or by an externally generated signal (typically a low voltage wall switch, photocell, access system, fire alarm or building management system). All Powerlink components mount inside a standard lighting panelboard to provide a compact, space saving installation. Powerlink intelligent lighting control systems feature a powerful microprocessor based controller that provides system intelligence for 168 remotely operated branch circuits. Primary panelboards contain the control electronics, power supply, and control bus strips for up to 84 branch circuit breakers. Sub-panels extend the capability of the system by allowing remotely operated branch circuit breakers to be operated from the primary controller via a simple, 4-wire, sub-net connection. Powerlink panels systems have the capability of being networked together and operated from a central workstation or via a remote modem connection. Powerlink software allows users to remotely configure the system, change time schedules, monitor circuit breaker or input status, and override zones and breakers. BACnet Capability The Building Automation and Control network (BACnet) communication protocol is incorporated into the Powerlink™ controller design. The addition of the BACnet protocol allows Powerlink panels to be easily integrated into a Building Automation System (BAS) employing this open communication standard without the need for communication bridges or gateways. Controller Powerlink NF3500G4 controllers support 'native' BACnet and Ethernet communications.

9 PANELBOARDS

Powerlink available in column width design

9-38

© 2024 Schneider Electric All Rights Reserved