SE Digest 178
MasterPact™ Power Circuit Breakers
MasterPact™ NT/NW Circuit Breakers Class 613 / Refer to Catalog 0613CT0001
www.se.com/us
Table 7.160: MasterPact NT Circuit Breaker Ratings
ANSI C37 Certified/ UL 1066 Listed
UL 489 Listed
Standard Frame Rating Interrupting Code
1600A [27]
800A
800A
1200A
LF [28]
LF [28]
N1 42 42 — 42 — 40 —
N H L1
L
N H L1
L
N H L1
L
240Vac 480Vac 600Vac
50 65 100 200 200 50 65 100 200 200 50 65 100 200 50 50 65 100 100 50 50 65 100 100 50 50 65 100 35 50 — — — 35 50 — — — 35 50N/AN/A 35 35 10 10 10 35 35 10 10 10 35 35 10 10 40 40 10 10 10 40 40 10 10 10 40 40 10 10 25 25 10 10 10 25 25 10 10 10 25 25 10 10 ————Yes————Yes————
Interrupting Current (kA RMS) 50/60 Hz
Short-time Withstand Current (kA RMS)
Built-in Instantaneous Override (kA RMS ±10%)
Close and latch rating (kA RMS)
Tested to show the arc flash hazard risk category as referenced by NFPA70E
25–30 ms with no intentional delay
Breaking time Closing time Sensor Rating
25–30 ms with no intentional delay (9 ms for L and LF)
<50ms
100–250A 400–800A
100–250A 400–800A
600–1200A
800–1600A
—
12,500
12,500
12,500
12,500
Mechanical Electrical
Endurance Rating (C/O Cycles) With No Maintenance
2800
2800
2800
2800
Table 7.161: MasterPact NW/NT Circuit Breaker Remote Racking Description
Cat. No.
MasterPact NW/NT Remote Racking Devices [29] MasterPact NW Remote Racking Device [29] MasterPact NT Remote Rackign Device [29]
NWNTMPRRT
NWMPRRT NTMPRRT
Mounting Bracket Kit for NW Remote Racking (contains 10 mounting brackets) [30] Mounting Bracket Kit for NT Remove Racking (contains 10 mounting brackets) [30]
S47100 S47104 S47101 S47102 S47103 S47105
Control Unit for NW Remote Racking [30] 30 ft Control Cable for NW Remote Racking [30] Drive Shaft for NW Remote Racking [30]
Drive Shaft for NT Remote Racking [30]
NWMPRR
7 MINIATURE AND MOLDED CASE
CIRCUIT BREAKERS
[27] Fixed mounted only. [28] Drawout mounted only. [29] Unit comes with 10 mounting brackets included. [30] For replacement only.
7-80
© 2021 Schneider Electric All Rights Reserved July 30, 2021
Made with FlippingBook flipbook maker