SE Digest 178

First page Table of contents Previous page 277 Next page Last page

MasterPact™ MTZ Circuit Breakers Class 0614 / Refer to Catalog 0614CT1701

MasterPact™ Power Circuit Breakers

www.se.com/us

MicroLogic X Control Unit for MasterPact MTZ Circuit Breakers The MicroLogic X control unit protection functions include overcurrent, short-circuit, and ground-fault protection. Along with the standard protection functions LI, LSI, and LSIG, new features enhance the overall performance of a system: dual settings, fine settings, fast tripping. MicroLogic X measures electrical parameters of a power system: currents, voltages, frequency, power, energy, power factor, current and power demand. Min/Max and average values are calculated for most of the parameters. MicroLogic X capability for maintenance & diagnostics simplifies circuit breaker service and operations. Relevant indicators and messages are powerful tools that can help the user scheduling both preventive and predictive maintenance, and device replacement. MasterPact MTZ Digital Modules Options for Advanced Functions Optional Digital Modules can be purchased and downloaded to enhance the performance of MicroLogic X control units. They are dedicated to advanced protection, measurement, and maintenance &diagnostics, and are available through Go Digital on the Schneider Electric website.

Menus

Warning

MICROLOGIC

Home

Alarms Alarms & H... Maintenan... Measures Protection Quickview Quickview Measures

Home

Quickview Measures

Alarms & H... Maintenan...

Embedded HMI

Isd Ii

Ig I n

Isd Ii

Ig I n

Op.

Test Reset

TRIPCAUSE

7.0X

NFC

ID: 1989421527520002LV847604

MICROLOGIC

DISCONNECT BEFORE DIELECTRIC TEST

In1600A

In1600A ERMS Engaged DISCONNECT BEFORE DIELECTRIC TEST

Alarm

DISCONNECT BEFORE DIELECTRIC TEST

In1600A

Part Number

Isd Ii

Ig I n

Isd Ii

Ig I n

Op.

Test Reset

Module (Available on the Schneider Electric GoDigital Website)

Isd Ii

Ig I n

TRIP CAUSE

Op.

7.0X

TRIP CAUSE

Isd Ii

Ig I n

ID: 1989421527520002LV847604

Protection ANSI 27/59—Under/Over Voltage Protection ANSI 32P—Reverse Active Power Protection

Op.

Monitors the circuit breaker voltages and trips when the voltage exceeds the settings.

6.0 X ID: 1989421527520002LV847604

LV850012

TRIP CAUSE

Monitors the active power.

LV850011 LV850007

DISCONNECT BEFORE DIELECTRIC TEST

ANSI 51N/51G—Ground-Fault Alarm Provides an integrated ground fault alarm.

Used to lower the protection settings in order for the MasterPact MTZ circuit breaker to trip faster, reducing arc energy. Calculates and displays the active, reactive and apparent energy per phase of the power system and provides total active, reactive and apparent energy per phase. Provide harmonics of voltage and current to the 40th harmonic. Displays available circuit breaker information to help determine potential causes of an event and also provides guidance for potential solutions to restore power. Assists in closing or opening the circuit breaker remotely with Bluetooth by delivering applicable instructions. Requires Comm & Diag accessories. Automatically logs five cycles of phase and neutral currents. Allows easy integration in existing Modbus installations where modification of supervision software for MTZ circuit breakers is not desired.

ERMS—Energy Reducing Maintenance Settings

In 1600 A

LV850009

Metering Energy per Phase Digital Module Individual Harmonics Analysis Maintenance & Diagnostic Power Restoration Assistant,

LV850002

PC running EcoStruxure Power Commission

LV850006

LV850004

MasterPact Operation Assistant

LV850005

Waveform Capture on Trip Event

LV850003

Modbus Legacy Dataset LV850045 New generation MicroLogic X control units incorporate wireless technology (Bluetooth and NFC) that allows the transfer of a wide selection of critical information (protection, measurements, maintenance & diagnostics) to your mobile device, by means of the EcoStruxure Power Device App. Alternatively, MasterPact MTZ can be equipped with ETHERNET communication through either the IFE module or the new embedded EIFE that includes webpages. Modbus SL communication is available through the IFM interface module.

CIRCUIT BREAKERS

7 MINIATURE AND MOLDED CASE

7-67

Made with FlippingBook flipbook maker