SE Digest 178

Plug-In and Drawout Mountings

PowerPact™ Circuit Breaker Accessories

Class 611, 612 / Refer to Catalog 0611CT1001 , 0612CT0101

www.se.com/us

Mountings

Table 7.116: Plug-In and Drawout Mountings for H- and J-Frame Circuit Breakers (3P or 2P in a 3P module) Description Factory

Field Installable Cat.No.

Installed Cat. No.

Plug-in base shipped with circuit breaker Drawout cradle shipped with circuit breaker

N D

— — —

Complete Factory Assembled Circuit Breakers

Circuit breaker Only

HJ00

Plug-In Base

Plug-in base kit

— S29278

Circuit breaker only

HJ00

—

Special Order Options for Plug-In and Drawout Circuit Breakers

Plug-in base kit

— S29278 — S29282 — S29283 — S37442 — S37443 — S29273 — S29274 — S29275 — S29284 — S29287 — S37436 — S37440

Drawout Cradle

H- and J-Frame Plug-In Mounting

H- and J-Frame Drawout Mounting

Cradle side plates (fixed part of chassis) Circuit breaker side plates (moving part of chassis)

H-Frame Shutter Kit (set of two) J-Frame Shutter Kit (set of two)

Fixed part 9-wire connector (mounted on base) Moving part 9-wire connector (mounted on circuit breaker)

Secondary Disconnect Blocks

Accessories for Plug-In and Drawout

Support for 2-moving connectors

Extended escutcheon with extended toggle handle Two position indicating switches (connected/ disconnected)

H-Frame Short Terminal Cover (3P J-Frame Short Terminal Cover (3P)

Table 7.117: Plug-In and Drawout Mountings for L-Frame Circuit Breakers

Plug-in Mounting

Drawout Mounting

Factory Installed Cat. No.

Field Installed Cat. No.

Factory Installed Cat. No.

Field Installable Cat.No.

Description

Poles

3 4 3 4

N N

— —

D D

— —

Kit (stationary and moving parts)

— S32514 — S32515

— S32514 — S32515 — S32532 — S32533 — 2x S32562 — 2x S32563 —

Plug-in base

Stationary Part

Fixed part of chassis Circuit breaker only Moving part of chassis

—

— — —

HJ00

HJ00

—

Moving Part

L-Frame Plug-In Mounting

L-Frame Drawout Mounting

3 4

— 2x S32562 — 2x S32563

Short terminal covers

Table 7.118: Plug-In and Drawout Accessories for L-Frame Circuit Breakers Description Field Installable Cat.No.

FixedPart Moving Part

9-wire connector 9-wire connector

S29273 S32523 S32525 S29272

Secondary Disconnecting Blocks

Support for 3 moving connectors 9-wire manual auxiliary connector

Fixed + Moving

Two shutters for plug-in base Extended escutcheon for toggle

Shutters

32521

S32534 S29286

Locking device (key lock is not included)

Chassis Accessories

L-Frame Locking Device

L-Frame Disconnecting Blocks

Two position indicating switches (connected/disconnected)

29287

Table 7.120: Drawout Cradle and Accessories for P-Frame Circuit Breakers Description Cat.No. Drawout Cradle

Table 7.119: Termination Options Termination Letter Termination No. N=Plug-in LGL36400U31X

Product Selector

For factory-installed termination, place termination letter in the third block of the circuit breaker catalog number.

Front Connected Flat (FCF)

SFCF12 [37] SRCTV12 [37]

Cradle Connectors

D=Drawout

Rear Connected T Horizontal/Vertical (RCTH/RCTV)

Modbus™ cradle communication module

S33852 S48933 S33763 S33170 S33171 S33767 S33772 S33786 S33788 S33857 S33859 S33098 S33099 S33166 S48899

Safety shutters

Secondary disconnects terminal shield

7 MINIATURE AND MOLDED CASE

Cradle position switch 1a/1b Form C— Connected/test/disconnected Low level cradle position switch 1a/1b Form C—Connected/test/disconnected

Cell keying kit

Disconnected position key locking—provision for Kirk or Federal Pioneer Lock

Cradle Accessories

Door interlock kit Racking interior kit

P-Frame Drawout Cradle Connections

Door escutcheon (for replacement only, included with circuit breaker)

CIRCUIT BREAKERS

Transparent cover

Push-in terminal kit (3 wires) Push-in terminal kit (6 wires)

Finger cluster

Cluster grease (12 oz. tube)

Needs 2 kits per cradle.

[37]

7-60

© 2021 Schneider Electric All Rights Reserved July 30, 2021