SE Digest 178
Timers
TypeJCK
Class 9050 / Refer to Catalog 9050CT9601
www.se.com/us
Type JCK60 and JCK70 Timers NOTE: Type JCK60 and JCK70 Timers are rated for AC supply voltage only. They are not rated for DC coil. TypeJCK60 This On-Delay timer uses four push button thumbwheels to set the time delay. One switch is used for the range. The remaining three are used for the time setting. Table 23.152: Selection
23 RELAYS AND TIMERS
Timing Modes
Timing Ranges
Type
0.01s 0.1s S 0.1m M 0.1h H
0.05–9.99 seconds 00.1–99.9 seconds 001–999 seconds 00.1–99.9 minutes 001–999 minutes 00.1–99.9 hours 001–999 hours
OnDelay
JCK60 [6]
TypeJCK70 This multifunction multirange time delay relay uses five push button thumbwheel switches. Three switches are used for the time delay, one switch is used for the timing range, and the other switch is used to select the timing mode. Table 23.153: Selection
9050JCK60V14
Timing Modes
Timing Ranges
Type
OnDelay Interval
OffDelay OneShot Repeat Cycle-Off [7] Repeat Cycle-On On/Off Delay 1 Shot Falling Edge Watchdog Trigger On Delay
JCK70 [6]
Same as JCK60
9050JCK70V14
Table 23.154: Sockets Contact Terminal Arrangement
For Use with Relays
Catalog Number [8]
Connection
Sold in Lots of
JCK11–19 JCK31–39 JCK51–59 JCK60
1
8501NR51
JCK1F JCK3F JCK5F
10
8501NR51B
Mixed [9]
Screw Connector
JCK21–29 JCK41–49
1
8501NR61
JCK70 JCK2F JCK4F
10
8501NR61B
8501NR61
JCK11–19 JCK31–39 JCK51–59 JCK60
1
8501NR52
JCK1F JCK3F JCK5F
10
8501NR52B
Separate [10]
Screw Connector
JCK21–29 JCK41–49
1
8501NR62
JCK70 JCK2F JCK4F
10
8501NR62B
Table 23.155: Accessories (sold in lots of 10) Description For Use With
Catalog Number
Sold in Lots of
8501NR51 sockets 8501NR52 sockets 8501NR61 sockets 8501NR62 sockets
Metal Restraining Strap
1
8501NH7
8501NR52
Approvals for 9050JCK Timers
File: E3190 CCN: NLDX, NLDX7 [11]
File: 260367 Class: 321107
RoHS Com pliant
File: E3190 CCN:NLDX2
IEC 61810-1
8501NH7
[6] Voltage code must be specified to order this product. Refer to the standard voltage codes listed in Table 23.150 and insert as shown in Table 23.151. [7] The repeat cycle mode uses the same on-time and off-time. [8] Please note that the B suffix only desginates quantities of 10 and is not printed on the socket. [9] The inputs and outputs are mixed on both sides. [10] The inputs and outputs are on separate sides. [11] When used with the appropriate 8501NR socket.
23-110
© 2020 Schneider Electric All Rights Reserved 10/25/2020
Made with FlippingBook flipbook maker