MELSERVO-J4

Options/Peripheral Equipment

Products on the Market for Servo Motors Contact the relevant manufacturers directly. When fabricating a cable with the following connectors, refer to the relevant manufacturers' instruction manuals for wiring and assembling procedures.

Cable clamp

Plug

Power connector for HG-JR 1000 r/min series (6 kW to 12 kW) and 1500 r/min series (7 kW to 15 kW) (Note 4) Rotary

Backshell

Backshell (DDK Ltd.)

Cable clamp (DDK Ltd.)

Plug (DDK Ltd.)

Applicable cable example

Applicable servo motor

Feature (Note 1)

Cable OD [mm]

Model

Type

Model

Model

Wire size (Note 2)

HG-JR601, 801, 12K1,

30 to 32.5

CE3057-24A-1-D

701M, 11K1M, 15K1M, 6014, 8014, 12K14, 701M4, 11K1M4, 15K1M4

IP67 CE05-6A32-17SD-D Straight CE05-32BS-S-D- OB (Note 5)

22 mm 2 (AWG 4)

CE3057-24A-2-D

27.5 to 29.6

Straight type

Angle type

Cable clamp

Cable clamp

Plug

Plug

Power connector for HG-RR/HG-UR series

Rotary

Plug (with backshell) (DDK Ltd.)

Cable clamp (DDK Ltd.)

Applicable cable example

Applicable servo motor

Feature (Note 1)

Type

Model

Model

Wire size (Note 2)

Cable OD [mm]

9.5 to 13 12.5 to 16

CE3057-12A-2-D CE3057-12A-1-D

IP67 EN compliant

CE05-6A22-23SD-D-BSS

HG-RR103, 153, 203/ HG-UR72, 152

2 mm 2 to 3.5 mm 2 (AWG 14 to 12)

15.9 or smaller (bushing ID)

General environment (Note 3)

D/MS3106B22-23S

D/MS3057-12A

Straight

13 to 15.5 15 to 19.1

CE3057-16A-2-D CE3057-16A-1-D

IP67 EN compliant

CE05-6A24-10SD-D-BSS

HG-RR353, 503/ HG-UR202, 352, 502

5.5 mm 2 to 8 mm 2 (AWG 10 to 8)

19.1 or smaller (bushing ID)

General environment (Note 3)

D/MS3106B24-10S

D/MS3057-16A

9.5 to 13 12.5 to 16

CE3057-12A-2-D CE3057-12A-1-D

IP67 EN compliant

CE05-8A22-23SD-D-BAS

HG-RR103, 153, 203/ HG-UR72, 152

2 mm 2 to 3.5 mm 2 (AWG 14 to 12)

15.9 or smaller (bushing ID)

General environment (Note 3)

D/MS3108B22-23S

D/MS3057-12A

Angle

13 to 15.5 15 to 19.1

CE3057-16A-2-D CE3057-16A-1-D

IP67 EN compliant

CE05-8A24-10SD-D-BAS

HG-RR353, 503/ HG-UR202, 352, 502

5.5 mm 2 to 8 mm 2 (AWG 10 to 8)

General environment (Note 3) 19.1 or smaller (bushing ID) Notes: 1. The IP rating indicated is for the connector's protection against ingress of dust and water when coupled to a servo amplifier/servo motor. If the IP rating of the servo amplifier/servo motor differs from that of these connectors, overall IP rating depends on the lowest of all. 2. The wire size shows wiring specification of the connector. Refer to "Selection Example in HIV Wires for Servo Motors" in this catalog for examples of wire size selection. 3. Not compliant with EN. 4. This connector is usable only when the outer diameter of the cable used for HG-JR 1000 r/min series (6 kW to 12 kW) and 1500 r/min series (7 kW to 15 kW) is larger than 23.8 mm. 5. This backshell is used to combine a plug (CE05-6A32-17SD-D) and a cable clamp (CE3057-24A-_-D). Contact the manufacturers directly. D/MS3108B24-10S D/MS3057-16A

Rotary Rotary servo motor

Linear Linear servo motor

Direct Direct drive motor

5-27