MELSERVO-J4

Options/Peripheral Equipment

Products on the Market for Servo Motors Contact the relevant manufacturers directly. When fabricating a cable with the following connectors, refer to the relevant manufacturers' instruction manuals for wiring and assembling procedures.

Servo Amplifiers Rotary Servo Motors Linear Servo Motors Direct Drive Motors Options/Peripheral Equipment Product List LVS/Wires Cautions

Straight type

Angle type

Cable clamp

Cable clamp

Plug

Plug

Power connector for HG-SR/HG-JR/TM-RFM series

Rotary Direct

Plug (with backshell) (DDK Ltd.)

Cable clamp (DDK Ltd.)

Applicable cable example

Applicable servo motor HG-SR51, 81, 52, 102, 152, 524, 1024, 1524/ HG-JR53, 73, 103, 153, 203, 534, 734, 1034, 1534, 2034, 3534, 5034/ TM-RFM012G20, 048G20, 072G20 HG-SR121, 201, 301, 202, 352, 502, 2024, 3524, 5024/ HG-JR353, 503/ TM-RFM040J10, 120J10 HG-SR421, 702, 7024/ HG-JR703, 903, 601, 801, 12K1, 701M, 11K1M, 15K1M, 7034, 9034, 6014, 8014, 12K14, 701M4, 11K1M4, 15K1M4/ TM-RFM240J10 HG-SR51, 81, 52, 102, 152, 524, 1024, 1524/ HG-JR53, 73, 103, 153, 203, 534, 734, 1034, 1534, 2034, 3534, 5034 HG-SR121, 201, 301, 202, 352, 502, 2024, 3524, 5024/ HG-JR353, 503 HG-SR421, 702, 7024/ HG-JR703, 903, 601, 801, 12K1, 701M, 11K1M, 15K1M, 7034, 9034, 6014, 8014, 12K14, 701M4, 11K1M4, 15K1M4

Feature (Note 1)

Type

Model

Model

Wire size (Note 3)

Cable OD [mm]

8.5 to 11

CE3057-10A-2-D

2 mm 2 to 3.5 mm 2 (AWG 14 to 12)

IP67 EN compliant

CE05-6A18-10SD-D-BSS

CE3057-10A-1-D

10.5 to 14.1

2 mm 2 to 3.5 mm 2 (AWG 14 to 12)

14.3 or smaller (bushing ID)

General environment (Note 2)

D/MS3106B18-10S

D/MS3057-10A

9.5 to 13

CE3057-12A-2-D

5.5 mm 2 to 8 mm 2 (AWG 10 to 8)

IP67 EN compliant

CE05-6A22-22SD-D-BSS

CE3057-12A-1-D

12.5 to 16

Straight

5.5 mm 2 to 8 mm 2 (AWG 10 to 8)

15.9 or smaller (bushing ID)

General environment (Note 2)

D/MS3106B22-22S

D/MS3057-12A

IP67 EN compliant

2 to 22 mm 2

CE05-6A32-17SD-D-BSS CE3057-20A-1-D 14 mm

22 to 23.8

(AWG 6 to 4)

General environment (Note 2)

14 mm 2 to 22 mm 2 (AWG 6 to 4)

23.8 or smaller (bushing ID)

D/MS3106B32-17S

D/MS3057-20A

8.5 to 11

CE3057-10A-2-D

2 mm 2 to 3.5 mm 2 (AWG 14 to 12)

IP67 EN compliant

CE05-8A18-10SD-D-BAS

CE3057-10A-1-D

10.5 to 14.1

2 mm 2 to 3.5 mm 2 (AWG 14 to 12)

14.3 or smaller (bushing ID)

General environment (Note 2)

D/MS3108B18-10S

D/MS3057-10A

CE3057-12A-2-D 5.5 mm 2 to 8 mm 2 (AWG 10 to 8)

9.5 to 13

IP67 EN compliant

CE05-8A22-22SD-D-BAS

CE3057-12A-1-D

12.5 to 16

Angle

5.5 mm 2 to 8 mm 2 (AWG 10 to 8)

15.9 or smaller (bushing ID)

General environment (Note 2)

D/MS3108B22-22S

D/MS3057-12A

IP67 EN compliant

2 to 22 mm 2

CE05-8A32-17SD-D-BAS CE3057-20A-1-D 14 mm

22 to 23.8

(AWG 6 to 4)

General environment (Note 2)

14 mm 2 to 22 mm 2 (AWG 6 to 4)

23.8 or smaller (bushing ID)

D/MS3108B32-17S

D/MS3057-20A

Notes: 1. The IP rating indicated is for the connector's protection against ingress of dust and water when coupled to a servo amplifier/servo motor. If the IP rating of the servo amplifier/servo motor differs from that of these connectors, overall IP rating depends on the lowest of all. 2. Not compliant with EN. 3. The wire size shows wiring specification of the connector. Refer to "Selection Example in HIV Wires for Servo Motors" in this catalog for examples of wire size selection.

Rotary Rotary servo motor

Linear Linear servo motor

Direct Direct drive motor

5-26