MELSERVO-J4

Options/Peripheral Equipment

Cables and Connectors for Servo Motor Encoder Refer to "Details of Option Connectors for Servo Motors" in this catalog for the detailed models. Encoder cables are not subject to European Low Voltage Directive (50 V AC to 1000 V AC and 75 V DC to 1500 V DC). Item Model IP rating (Note 1) Application

Servo Amplifiers Rotary Servo Motors Linear Servo Motors Direct Drive Motors Options/Peripheral Equipment Product List LVS/Wires Cautions

Cable length

Description

For HG-JR601, 801, 12K1, 15K1, 20K1, 25K1, 30K1, 37K1, 701M, 11K1M, 15K1M, 22K1M, 30K1M, 37K1M, 6014, 8014, 12K14, 15K14, 20K14, 25K14, 30K14, 37K14, 701M4, 11K1M4, 15K1M4, 22K1M4, 30K1M4, 37K1M4, 45K1M4, 55K1M4 For HG-JR601, 801, 12K1, 15K1, 20K1, 25K1, 30K1, 37K1, 701M, 11K1M, 15K1M, 22K1M, 30K1M, 37K1M, 6014, 8014, 12K14, 15K14, 20K14, 25K14, 30K14, 37K14, 701M4, 11K1M4, 15K1M4, 22K1M4, 30K1M4, 37K1M4, 45K1M4, 55K1M4 For connecting load side encoder, linear encoder, or thermistor For TM-RG2M/ TM-RU2M/TM-RFM (connecting direct drive motor and servo amplifier, or absolute position storage unit and servo amplifier) For TM-RG2M/ TM-RU2M/TM-RFM (connecting direct

MR-ENECBL2M-H-MTH 2 m MR-ENECBL5M-H-MTH 5 m MR-ENECBL10M-H-MTH 10 m MR-ENECBL20M-H-MTH 20 m MR-ENECBL30M-H-MTH 30 m MR-ENECBL40M-H-MTH 40 m MR-ENECBL50M-H-MTH 50 m

Encoder connector

Servo amplifier connector

(15) Encoder cable (Note 2)

IP67

Encoder connector

Servo amplifier connector

(16) Encoder connector set

MR-ENECNS

-

IP67

Applicable cable Wire size: 0.3 mm 2 to 1.25 mm 2 (AWG 22 to 16) Cable OD: 6.8 mm to 10 mm

Servo amplifier connector

(17) Encoder connector set

MR-J3CN2

-

-

Encoder connector or absolute position storage unit connector

Servo amplifier connector

(18) Encoder connector set

MR-J3DDCNS

-

IP67

Applicable cable Wire size: 0.25 mm 2 to 0.5 mm 2 (AWG 23 to 20) Cable OD: 7.8 mm to 8.2 mm

Absolute position storage unit connector

Encoder connector

(19) Encoder connector set

MR-J3DDSPS

-

IP67

drive motor and absolute position storage unit)

Applicable cable Wire size: 0.25 mm 2 to 0.5 mm 2 (AWG 23 to 20) Cable OD: 7.8 mm to 8.2 mm

Junction connector

Servo amplifier connector

For branching load side encoder

(20) Junction cable for fully closed loop control (Note 3) MR-J4FCCBL03M

0.3 m -

Junction connector

Servo amplifier connector

For branching thermistor

(21) Junction cable for linear servo motor (Note 3) MR-J4THCBL03M

0.3 m -

For fully closed loop control or branching thermistor

Junction connector

Servo amplifier connector

(22) Connector set

MR-J3THMCN2

-

-

Notes: 1. The IP rating indicated is for the connector's protection against ingress of dust and water when coupled to a servo amplifier/servo motor/absolute position storage unit. If the IP rating of the servo amplifier/servo motor/absolute position storage unit differs from that of these connectors, overall IP rating depends on the lowest of all. 2. -H and -L indicate a bending life. -H indicates a long bending life, and -L indicates a standard bending life. 3. Servo system will not operate correctly when the junction cables for fully closed loop control and for linear servo motor are used mistakenly or interchangeably. Make sure of the model before placing an order.

5-14