MELSERVO-J4

Options/Peripheral Equipment

Cables and Connectors for Servo Motor Encoder Refer to "Details of Option Connectors for Servo Motors" in this catalog for the detailed models. Encoder cables are not subject to European Low Voltage Directive (50 V AC to 1000 V AC and 75 V DC to 1500 V DC). Item Model IP rating (Note 1) Application

Cable length

Description

MR-J3ENSCBL2M-H *1 MR-J3ENSCBL5M-H *1 MR-J3ENSCBL10M-H *1 MR-J3ENSCBL20M-H *1 MR-J3ENSCBL30M-H *1 MR-J3ENSCBL40M-H *1 MR-J3ENSCBL50M-H *1 MR-J3ENSCBL2M-L *1 MR-J3ENSCBL5M-L *1 MR-J3ENSCBL10M-L *1 MR-J3ENSCBL20M-L *1 MR-J3ENSCBL30M-L *1

2 m 5 m

For HG-KR/HG-MR (junction type) For HG-SR/ HG-JR53, 73, 103, 153, 203, 353, 503, 703, 903, 534, 734, 1034, 1534, 2034, 3534, 5034, 7034, 9034/ HG-RR/HG-UR (direct connection type) For HG-KR/HG-MR (junction type) For HG-SR/ HG-JR53, 73, 103, 153, 203, 353, 503, 703, 903, 534, 734, 1034, 1534, 2034, 3534, 5034, 7034, 9034/ HG-RR/HG-UR (direct connection type) (straight type) For HG-SR/ HG-JR53, 73, 103, 153, 203, 353, 503, 703, 903, 534, 734, 1034, 1534, 2034, 3534, 5034, 7034, 9034/ HG-RR/HG-UR (straight type) HG-JR53, 73, 103, 153, 203, 353, 503, 703, 903, 534, 734, 1034, 1534, 2034, 3534, 5034, 7034, 9034/ HG-RR/HG-UR (angle type)

10 m 20 m 30 m 40 m 50 m

Junction connector or encoder connector

Servo amplifier connector

IP67

(10) Encoder cable (Note 2)

Use this in combination with (8) or (9) for HG-KR/HG-MR series.

2 m 5 m

10 m 20 m 30 m

Junction connector or encoder connector

Servo amplifier connector

Encoder connector set (Note 5) (one-touch connection type)

(11)

MR-J3SCNS

-

IP67

Use this in combination with (8) or (9) for HG-KR/HG-MR series. Applicable cable Wire size: 0.5 mm 2 (AWG 20) or smaller Cable OD: 5.5 mm to 9.0 mm (Note 4)

Encoder connector

Servo amplifier connector

Encoder connector set (Note 3, 5) (screw type)

(12)

MR-ENCNS2 *2

-

IP67

Applicable cable Wire size: 0.5 mm 2 (AWG 20) or smaller Cable OD: 5.5 mm to 9.0 mm (Note 4)

Encoder connector set (Note 5) (one-touch connection type)

(13)

MR-J3SCNSA *2

-

IP67 For HG-SR/

Encoder connector

Servo amplifier connector

Applicable cable Wire size: 0.5 mm 2 (AWG 20) or smaller Cable OD: 5.5 mm to 9.0 mm (Note 4)

Encoder connector set (Note 3, 5) (screw type)

(14)

MR-ENCNS2A *2

-

IP67

Notes: 1. The IP rating indicated is for the connector's protection against ingress of dust and water when coupled to a servo amplifier/servo motor. If the IP rating of the servo amplifier/servo motor differs from that of these connectors, overall IP rating depends on the lowest of all. 2. -H and -L indicate a bending life. -H indicates a long bending life, and -L indicates a standard bending life. 3. A screw thread is cut on the encoder connector of HG-SR/HG-JR/HG-RR/HG-UR series, and the screw type connector can be used. 4. Cable clamps and bushings for cable OD of 5.5 mm to 7.5 mm and of 7.0 mm to 9.0 mm are included in the set. 5. The connector contains a plug and contacts. Using contacts for other plugs may damage the connector. Be sure to use the enclosed contacts. For unlisted lengths and fabricating cables *1. For unlisted lengths of the cables, please contact Mitsubishi Electric System & Service Co., Ltd. OVERSEAS BUSINESS PROMOTION DIVISION (Email: osb.webmaster@ melsc.jp) *2. For fabricating encoder cables with these connectors, please contact Mitsubishi Electric System & Service Co., Ltd. OVERSEAS BUSINESS PROMOTION DIVISION (Email: osb.webmaster@melsc.jp)

5-13