Honeywell Catalog

HONEYWELL ACCESSORIES

HDMI Restorer

The Restorer analyzes and corrects the digital signal for the amount of loss over long runs of HDMI cable. In addition, it visually verifies the operation of the entire HDMI communication system and eliminates any inferior loading induced on the interface. The restorer should be installed, with included power supply, at the display side of the connection.

• Designed for easy set-up and operation; wall or table mount • Direct coupled from input to output offering maximum video bandwidth • Self diagnoses and monitoring indicators • Designed for HDTV 480p, 720p, 1080i, and 1080p • 75 Ohm Mini Coax

Features:

HDMI RESTORER DESCRIPTION HDMI Restorer

PART#

7952NS08

HDMI Tester

The 7953NS08 HDMI cable tester sends a controlled signal through every conductor in the cable interface to give you a go or no go decision on the use of your HDMI cables. There are nineteen conductors making up the HDMI interface composing of nine discrete functions. The tester is equipped with nine LEDs that illuminate one by one as each function is verified. Use the 7053NS08 to ensure your HDMI cable hasn’t been damaged during or after installation; if any of the LEDs fail to illuminate the cable is compromised.

• Measures each sub circuit within the HDMI interface and displays a pass or fail function • Install HDMI and DVI cables with confidence • 9 LEDs illuminate testing of all nine functions of the 19 conductors of the HDMI cable • Easy to use, just connect each side of the cable • May be used for DVI cable assemblies, CEC LED will remain unlit

Features:

HDMI TESTER DESCRIPTION HDMI Tester

PART#

7953NS08

53