SE Modicon M580 Brochure

Modicon 580 automation platform Modicon M580 Communication modules Advanced RTU module

Presentation, functions, description

Presentation The BMENOR2200H Advanced RTU module is a communication module fully based on the Schneider Electric Ethernet backbone to address advanced use cases and complex configurations. It can be used in Modicon M580 Hot-standby system to synchronize event data between modules in order to avoid event loss or event duplication after controller switchover. Thus, BMENOR2200H Advanced RTU module reaches new levels of architecture connectivity and simplicity: b Advanced level of cybersecurity with native implementation in RTU protocol (Secure authentication and confidential communication). b Configuration, operating mode, and diagnostics are fully integrated inside EcoStruxure Control Expert. Cybersecurity settings are configured on embedded web page based on HTTPS. The BMENOR2200H module is designed to operate in large infrastructures such as Water & Waste Water, pipelines, power generation plants, and transportation. It supports harsh environments (extended temperature range: -25 to +70 °C/ -13 to +158 °F ). Functions BMENOR2200H features the following key functions: b DNP3 Net/Serial SAv2/5 by pre-shared key, Server/Client b System log for cybersecurity b Time synchronized by CPU or RTU protocol b Web page (HTTPS) for diagnostics and cybersecurity setting b SNTP Client

1

2

3

4

b SNMP v1/v3 Agent b RBAC Management

b IEC 60870-5-101/104, Server/Client b Channel Redundancy for IEC104 b TLS on RTU Protocols b Bulk configuration for RTU points

5

b Secure firmware download b Sequence of Events (SOE) b Modbus TCP Client/Server

1

b Data logging service (SD-card required) b Other enhanced cybersecurity functions: v Enhanced password policy and login policy

2

6

v System hardening, server services can be disabled/enabled v Rotary switch for selecting Advanced mode/Standard mode v Secure boot

6

3

4

Description BMENOR2200H is installed on an Ethernet rack only (supports up to 4 Advanced RTU modules per CPU, including other Ethernet module, based on different CPU levels).

7

5

Front view

Rear view

BMENOR2200H

8

The front panel of the BMENOR2200H module presents: 1 A screw for locking the module in a slot in the rack

9

2 A display block with 7 LEDs (hardware diagnostic information: RUN, detected error, download firmware, serial data status, detected SD Card error, Ethernet communication status, cybersecurity status) 3 A slot for a Flash memory card (only for BMXRMS004GPF 4GB SD-card), with green protective cover 4 A RJ45 serial port supporting RS485 and RS232 (1) The back panel of the BMENOR2200H module features: 5 A rotary switch for cybersecurity (Advanced mode, Standard mode and Reset) (a dedicated screwdriver is shipped in the box from factory) 6 A dual port for X-bus and Ethernet communication

10

(1) Dust cover is provided.

4/28