Global IEC Enclosures
01 Floor Standing Enclosures
Floor Standing
Accessories
1
Mounting brackets rear fixing, MPA-RF
Flush mounting plate fixing brackets, MPEF
Description:
For extra fixing of a heavily equipped mounting plate in the far rear position. Mounted directly to the enclosure frame for extra stability. Easy mounting without drilling. Can be fixed from the front even after the mounting plate is already in position. The combination with an MPR profile is advised.
Description:
To fix mounting plates in the enclosure. Brackets are needed when an extra mounting plate is required or when the enclosure is ordered without mounting plate (PE).
Material:
3 mm zinc plated steel.
Material:
3 mm zinc plated steel.
Pack quantity:
2 top brackets and 2 bottom sliding brackets with mounting accessories. Item no. MPA04
Pack quantity:
10 pieces with mounting accessories. Item no. MPEF10
Side mounting plate brackets, MPS
Mounting plate back to back bracket kit, MPBB
Description:
To mount the standard mounting plate on the side of the enclosure's frame. Provides a mounting surface that is flush with the profiles.
Material:
3 mm zinc plated steel.
Description:
To mount two mounting plates back to back at any depth within the enclosure’s usable space, the position can be adjusted in steps of 25 mm. The space between the mounting plates is less than 10 mm, maximizing the free usable space for customer use.
Pack quantity:
4 brackets with mounting accessories. Item no. MPS04
Material:
3 mm zinc plated steel.
Pack quantity:
2 top brackets, 4 side brackets, 4 bottom brackets with mounting accessories.
Item no. MPBB06
Mounting plate fixing brackets, MPE
Mounting plate reinforcement profiles, MPR
Description:
For extra support of the mounting plate in the middle, in addition to the normal top and bottom fixing.
Material:
3 mm zinc plated steel.
Pack quantity:
10 pieces.
Description:
Reinforcing a mounting plate (MP) when heavily equipped. For dampening of vibrations and stabilization. Easy mounting without drilling. In order to achieve maximum damping, fixing of the mounting plate to the profile is advised.
Mounting requirements:
Add CMB profiles.
Item no. MPE10
Material:
2 mm galvanized steel.
Pack quantity:
2 profiles with mounting accessories.
For enclosure W
Item no. MPR1200 MPR1600
1200 1600
60
GLOBAL IEC PRODUCT CATALOG
SUBJECT TO CHANGE WITHOUT NOTICE
GLOBAL IEC PRODUCT CATALOG
61
hoffman.nVent.com
hoffman.nVent.com
Made with FlippingBook flipbook maker