Square D Digest 179

Non-Reversing

Type S Combination Starters

Class 8539 / Refer to Catalog 8538CT9701

www.se.com/us

NEMA Size 0–2 in Oversized Enclosure 3-Pole Polyphase—600 Vac Maximum—50–60 Hz

For Form H30• (special lower-FLA factory-assembled starter combinations with Motor Logic™ SSOLR protection), see Solid-State Overload Relay Forms, page 16-120.

Table 16.136: Class 8539 Electronic Motor Circuit Protectors (MCP) in Oversized Enclosure, NEMA Size 0–2 [43][44][45] Full Voltage Type, Non-Reversing with Motor Logic SSOLR (replace ●●● with the voltage code) Ratings NEMA1 General Purpose Enclosure NEMA4X Watertight and Dusttight Stainless Steel (304) Enclosure NEMA12/3R [46] Dusttight and Driptight Industrial Use Enclosure

Motor Voltage (Starter Voltage) 16 NEMA AND DEFINITE PURPOSE CONTACTORS AND STARTERS Hp Range Polyphase

With External Reset

Without External Reset

Circuit Breaker (See Page 7-32 for Breaker Adjustment Range)

NEMA Size

Type [47]

Type [47]

Type [47]

Type [47]

SBG43S8●●●H30 [48] SCG44S8●●●H30 [48] SCG45S8●●●H30 [48] SDG42S8●●●H301 SDG43S8●●●H30 [48] SBG43S8●●●H30 [48] SCG44S8●●●H30 [48] SDG42S8●●●H301 SDG43S8●●●H30 [48] SDG44S8●●●H30 [48] SBG43S8●●●H30 [48] SCG44S8●●●H30 [48] SDG42S8●●●H301 SDG43S8●●●H30 [48] SBG43S8●●●H30 [48] SCG44S8●●●H30 [48] SDG42S8●●●H301 SDG43S8●●●H30 [48]

SBW43S8●●●H30 [48] SCW44S8●●●H30 [48] SCW45S8●●●H30 [48] SDW42S8●●●H301 SDW43S8●●●H30 [48] SBW43S8●●●H30 [48] SCW44S8●●●H30 [48] SDW42S8●●●H301 SDW43S8●●●H30 [48] SDW44S8●●●H30 [48] SBW43S8●●●H30 [48] SCW44S8●●●H30 [48] SDW42S8●●●H301 SDW43S8●●●H30 [48] SBW43S8●●●H30 [48] SCW44S8●●●H30 [48] SDW42S8●●●H301 SDW43S8●●●H30 [48]

SBA53S8●●●H30 [48] SCA54S8●●●H30 [48] SCA55S8●●●H30 [48] SDA52S8●●●H301 SDA53S8●●●H30 [48] SBA53S8●●●H30 [48] SCA54S8●●●H30 [48] SDA52S8●●●H301 SDA53S8●●●H30 [48] SDA54S8●●●H30 [48] SBA53S8●●●H30 [48] SCA54S8●●●H30 [48] SDA52S8●●●H301 SDA53S8●●●H30 [48] SBA53S8●●●H30 [48] SCA54S8●●●H30 [48] SDA52S8●●●H301 SDA53S8●●●H30 [48]

SBA43S8●●●H30 [48] SCA44S8●●●H30 [48] SCA45S8●●●H30 [48] SDA42S8●●●H301 SDA43S8●●●H30 [48] SBA43S8●●●H30 [48] SCA44S8●●●H30 [48] SDA42S8●●●H301 SDA43S8●●●H30 [48] SDA44S8●●●H30 [48] SBA43S8●●●H30 [48] SCA44S8●●●H30 [48] SDA42S8●●●H301 SDA43S8●●●H30 [48] SBA43S8●●●H30 [48] SCA44S8●●●H30 [48]

0.25–3 0.25–5 7.5 1.5–5 7.5–10 0.25–3 1.5–7.5 10 15 0.25–5 0.25–10 0.25–7.5 5–15 20–25 0.25–5 0.25–10

0 1 2 0 1 0 1 2 0 1 2 2

HLL36030M71 HLL36030M71 HLL36050M72 HLL36030M71 HLL36050M72 HLL36030M71 HLL36030M71 HLL36030M71 HLL36050M72 HLL36100M73 HLL36030M71 HLL36030M71 HLL36030M71 HLL36050M72 HLL36060M71 HLL36030M71 HLL36030M71 HLL36050M72

200 (208)

230 (240)

460 (480)

575 (600)

SDA42S8●●●H301 SDA43S8●●●H30 [48] NOTE: Some control transformers may require the use of oversized enclosures. Refer to . Table 16.137: Coil Voltage Codes Voltage Code 60Hz 50Hz 24 [49] 120 [50]

5–20 25

— 110 — 220 —

V01 V02 V08 V03 V04 V06 V07 V99

208 240 277 480 600 Specify

440 550 Specify

NOTE: For voltage codes used with control transformers, see page 16-118. Form S (separate control) is used when a separate source of power is available for the control (coil) voltage. Form S is available at no charge. Dimensions: page 16-59

Factory Modifications (Forms): page 16-117 Replacement Parts (Class 9998): page 16-123 Type S Accessories (Class 9999): page 16-127 For How to Order Information, see page 16-28.

[43] To order melting alloy overload relay, remove form "H30" from part number. [44] Not included in the Laser™ Delivery program [45] For NEMA Size 3–5 starters in oversized NEMA 1 or 12 enclosures, contact factory for pricing and TAG number.

[46] NEMA 12 enclosures can be field modified for outdoor non-corrosive and non–service entrance rated applications. See page 16-113 for more information. [47] Replace the three bullets (●●●) in the catalog number with the coil voltage code. Refer to the standard coil voltage codes shown in Table 16.137. [48] FormH30 , with the possibility of a fourth character to select a lower FLA range (for example, H308 ). See “Solid-State Overload Relay Forms” on page 16-120 [49] 24 V coils are not available on Sizes 4–6. On Sizes 00–3, where 24 V coils are available, FormS (separate control) must be specified (for example, order as 8539SBG41S8V01S). [50] These voltage codes must include FormS (provided at no charge). When specifying FormS, please include the motor voltage when ordering (for example, order as 8539SCG41S8V02S).

16-54

© 2024 Schneider Electric All Rights Reserved