Square D Digest 179

MiCOM Busbar Applications

MiCOM Protection Relays

www.se.com/us

MiCOM Busbar Differential Applications

Numerical Busbar Protection Relay Scheme (Centralized) Easergy™ MiCOM P746 numerical busbar protection provides centralized complete protection for all voltages level up to extra high voltage busbar configurations.

Models available: • MiCOMP746

Simple configuration for centralized architecture. The Easergy MiCOM P746 differential busbar protection provides a centralized one box or three boxes architecture and is very simple to use. It does not need to be deeply engineered and supports easy operation and maintenance of the busbar. Numerical Busbar Protection Relay Scheme (Distributed) The Easergy MiCOM P740 numerical busbar protection scheme provides scalable and complete protection for all voltage levels, from low to extra or ultra high-voltage busbar configurations. Models available:

P741 / P742 / P743 / P746

• MiCOM741 • MiCOM742 • MiCOM743

Easergy MiCOM P740 is one of the fastest and complete in its class, providing secure and sensitive protection for all types of voltage busbar configurations. It is easily adapted to any configuration and can operate with different types of CT.

Table 5.45: Functions available for the different models of the Busbar protection MiCOM range of relays ANSI Protection Function P741 P742 P743

P746

50N/51N 50/51P

Ground fault

● ● ● ●

● ● ● ●

● ● ● ● ● ● ● ● ●

Phase overcurrent Circuit breaker failure

50BF 87BB 87CZ 87P 87P CTS TCS VTS

● ● ●

Busbar

Check Zones

Phase segregated differential Sensitive ground fault differential Current transformer supervision

8zones 8zones

4zones

● ●

● ● ●

● ● ●

Trip circuit supervision

Voltage transformer supervision

Phase comparison

CT saturation detection

● ●

● ●

CT supervision

●

Table 5.46: Typical Catalog Numbers Catalog Number Advanced — Low impedance Busbar Differential (1 or 3 box mode)

Description

Series 40 - Low Impedance bus differential (7 sets of CT's) Protection, P746 (48-110Vdc), 1/5A CT inputs, 16In/16Out (user configurable voltage thresholds), 3xRJ-45, IEC61850, DNP3

P74622RABM0C48M

5 PROTECTION, CONTROL, AND ENERGYAUTOMATION

5-27

© 2024 Schneider Electric All Rights Reserved