Square D Digest 179

QO™ Miniature Circuit Breakers

QO Plug-On Circuit Breakers

Class 685, 690, 730, 912, 950 / Refer to Catalog: 0730CT9801

www.se.com/us

1 LOAD CENTERS

QO-EPD/EPE Circuit Breakers

QO-EPD/EPE circuit breakers provide overload and short circuit protection combined with Class B ground fault protection. They are designed to provide ground fault protection of equipment at a 30 mA level (EPD) or 100 mA level (EPE). They are not designed to protect people from electrical shock. Table 1.10: QO-EPD Circuit Breakers Ampere Rating [19] 1P

2P Common Trip 120/240 Vac 10kAIR 2 Spaces Required

120Vac 10kAIR 1 Space Required

QO315EPE [20] QO320EPE [20] QO330EPE [20] QO340EPE [20] QO350EPE [20] —

QO115EPD QO120EPD

QO215EPD QO220EPD QO225EPD QO230EPD QO240EPD QO250EPD

15 20 25 30 40 50 60

QO125EPD OBS

QO130EPD

— — —

QO220EPD

QO260EPD [21]

—

OBS This product is obsolete.

QO Switch Neutral Common Trip Circuit Breakers (QO-SWN) Switch Neutral Common Trip 2008 NEC ® 514.11 Table 1.11: QO-SWN Circuit Breakers Ampere Rating [22] 2 Wire 120 Vac 10kAIR 2 Spaces Required 15 QO215SWN 20 QO220SWN QO High Intensity Discharge Circuit Breakers (QO-HID) HID circuit breakers are for use on circuits feeding fluorescent and high intensity discharge (HID) lighting systems such as mercury vapor, metal halide, or high pressure sodium. These circuit breakers are physically interchangeable with QO circuit breakers. Table 1.12: QO-HID Circuit Breakers Ampere Rating [22] 1P 120/240 Vac 10kAIR 2P Common Trip 120/240 Vac 10kAIR 3P Common Trip 240Vac 10kAIR QO High Magnetic Trip Circuit Breakers (QO-HM) High magnetic trip circuit breakers are recommended for applications where high initial inrush may occur and for individual dimmer applications. Table 1.13: QO-HM Circuit Breakers 120 Vac—10 k AIR Ampere Rating [22] 1P 15A QO115HM [23] [24] 20A QO120HM [23] [24] Non-Automatic (Standard) Miniature Switches Miniature non-automatic switches have the same physical packaging as miniature circuit breakers, but open only when the handle is switched to the OFF position. Non-automatic switches provide no overcurrent protection or short circuit protection. They must not be used on systems that have an available fault current greater than the values listed in the table. Non-automatic switches are UL Listed per UL 1087 and are CSA certified. Table 1.14: QO Non-Automatic Miniature Switches, 240 Vac 10 kA Ampere Rating 2P 3P 60 QO200 QO300 OBS OBS This product is obsolete. 20 — QO220HID QO320HID

QO320HID

[19] 10–30 A circuit breakers are suitable for use with 60ºC or 75ºC conductors. 35–125 A circuit breakers are suitable for use with 75ºC conductors. [20] See note in Instruction Bulletin when using in an enclosure with a QO403 or QON prefix. [21] Suitable only for feeding 240 Vac and 208 Vac two-wire loads. Does not contain load neutral connection. [22] 10–30 A circuit breakers are suitable for use with 60oC or 75oC conductors. 35–60 A circuit breakers are suitable for use with 75oC conductors. [23] UL Listed as HACR type for use with air conditioning, heating and refrigeration equipment haing motor group combinations and marked for use with HACR type circuit breakers. [24] UL Listed as SWD (switching duty) rated. Suitable for switching 120 Vac fluorescent lighting loads.

1-6

© 2024 Schneider Electric All Rights Reserved