PowerStrut Catalog

FIBERGLASS

Pipe Hangers & Accessories

Clevis Hangers

are manufactured from glass-reinforced vinyl ester resin and are available for sizes 1" through 24".

Clevis hangers are available in two styles; molded and hand lay-up. The molded clevis hangers are manufactured from glass-reinforced polyurethane and are available for sizes 1 ⁄2" through 6". The hand lay-up clevis hangers

CVHPU – Molded Clevis Hangers

C

Part No.

Nominal Diameter

Max. Pipe O.D.

Hanger Rod

Load (lbs.)*

“A”

“B”

“C”

1 ⁄ 2 - 1

CVHPU-100

1

1.500 2.000 2.500 5.125 6.750

4.25 5.14 6.52

670

CVHPU-150 1 1 ⁄ 4 - 1 1 ⁄ 2

1 1 ⁄ 2

1.25

B

1 1 ⁄ 2 - 2 2 1 ⁄ 2 - 4 4 1 ⁄ 2 - 6

1 ⁄ 2

2 4 6

730

CVHPU-200 CVHPU-400 CVHPU-600

10.00 12.33

1,150 1,170

1.50

A

*Design load values shown represent a 3:1 safety factor.

100-1500 thru 100-1514 – Hand Lay-Up Clevis Hangers Part No. Size Range A (In.) Dimensions (in.) Hanger Rod Trans Rod Spreader Rod O.D. T H H1 W

Loads (lbs.)*

1 – 1 1 ⁄ 2 1 1 ⁄ 2 – 2 2 – 2 5 ⁄ 8 3 – 3 7 ⁄ 8 4 – 5 1 ⁄ 8 6 – 7 1 ⁄ 8 8 – 9 1 ⁄ 4

2 3 ⁄ 4 3 1 ⁄ 2 4 3 ⁄ 4 5 1 ⁄ 2

1 7 ⁄ 8 2 3 ⁄ 8

100-1500 100-1501 100-1502 100-1504 100-1505 100-1506 100-1507

60 60 90

1 1 ⁄ 2

1 ⁄ 8

1 ⁄ 2

3

2

W

100-1503 2 1 ⁄ 2 – 3 1 ⁄ 4

3 5 ⁄ 8 4 1 ⁄ 4 5 5 ⁄ 8 7 1 ⁄ 2 9 3 ⁄ 4

120 160 250 300 350 450 600 700 750 800 850 900

3 ⁄ 8

1 ⁄ 2

T

1 ⁄ 8

7

H

2

8 1 ⁄ 2

3 ⁄ 16

5 ⁄ 8

10 7 ⁄ 8

3

1 ⁄ 4

14 18

H1

100-1508 10 – 11 3 ⁄ 8 100-1509 12 – 13 1 ⁄ 2 100-1510 14 – 15 3 ⁄ 4

12

4

5

⁄ 8

1 ⁄ 4

21 1 ⁄ 2 24 1 ⁄ 2 27 3 ⁄ 8 34 1 ⁄ 2 35 1 ⁄ 2

14 1 ⁄ 8 16 1 ⁄ 2 19 1 ⁄ 2 22 1 ⁄ 2

1

3 ⁄ 4

⁄ 2

5

3 ⁄ 4

100-1511 100-1512 100-1513 100-1514

16 – 18 19 – 21 21 – 22 22 – 24

3

⁄ 8

A

3 ⁄ 4

3 ⁄ 4

6

1

24 28

1

⁄ 2

41

*Design load values shown represent a 3:1 safety factor.

Beam Clamps Aickinstrut beam clamps are available in two styles; molded and fabricated. The molded beam clamps are manufactured from glass-reinforced polyurethane and can accommodate 3 ⁄8", 1 ⁄2" and 5 ⁄8" hanger rod sizes. The molded beam clamps utilize the traditional “C” clamp style design. The fabrication beam clamps are manufactured from vinyl ester flat stock and utilize polyurethane bolts and channel nuts for clamping. Fabricated beam clamps are available for attaching to 1 ⁄4", 3 ⁄8" and 1 ⁄2" thick beam flanges.

Tech. Data Fiberglass Power-Angle Jr. Channel Unipier ® Solar Components Concrete Inserts Electrical Pipe & Conduit Clamps Fittings Fasteners Metal Channel

Each fabricated beam clamp assembly includes four (4) 1 ⁄2" standard duty channel nuts, four (4) 1 ⁄2" Polyurethane bolts and two (2) attachment clips. All Aickinstrut beam clamps allow easy attachment of threaded rod to “I” beams or other structural assemblies.

375PU-BC, 500PU-B – Molded Beam Clamps

Beam Clip – 375PU-BCCLP ( 3 ⁄ 8 ")

RGBC – Beam Clamps

3"

2 5 ⁄

8 "

4 1 ⁄

4 "

Note: Beam clamp clip must be purchased separately. Illustration purpose only

3"

1"

3 ⁄

4 "

1 1 ⁄

2 "

Thread Shear (lbs.)*

Thread Shear (lbs.)*

Part No.

Torque (ft./lbs.)

Part No.

Torque (ft./lbs.)

Size

Size

3 ⁄ 8 1 ⁄ 2 5 ⁄ 8

RGBC-1 RGBC-2 RGBC-3

3 ⁄ 8

375PU-BC 500PU-BC

400

10

500

10

1 ⁄ 2 *Design load values shown represent a 3:1 safety factor.

145

www.power-strut.com