MELSERVO-J4

Product List

Servo Amplifiers Rotary Servo Motors Linear Servo Motors Direct Drive Motors Options/Peripheral Equipment Product List LVS/Wires Cautions

Peripheral cables/Connector sets Item

Application

Model

Length

For MR-J4-GF_/ GF_-RJ, MR-J4-B_/ B_-RJ, MR-J4-A_/ A_-RJ, MR-J4-DUB_/ DUB_-RJ, MR-J4-DUA_/ DUA_-RJ, and MR-J4W_-B_ For connecting MR-J4-GF_/ GF_-RJ, MR-J4-B_/ B_-RJ, MR-J4-A_/ A_-RJ, MR-J4-DUB_/ DUB_-RJ, MR-J4-DUA_/ DUA_-RJ, or MR-J4W_-B with MR-J3-D05 and other safety control devices For analog monitor output of MR-J4-A_/ A_-RJ, and MR-J4-DUA_/ DUA_-RJ

STO cable

MR-D05UDL3M-B

3 m

Monitor cable

MR-J3CN6CBL1M

1 m

Personal computer communication cable (USB cable)

MR-J3USBCBL3M

3 m

MR-CUL06M

0.5 m For connecting resistance regeneration converter unit and drive unit For I/O signals of MR-J4-A_/ A_-RJ, MR-J4-03A6/ 03A6-RJ, MR-J4-DUA_/ DUA_-RJ, and MR-D01 0.6 m For connecting power regeneration converter unit or resistance regeneration converter unit and drive unit For I/O signals of MR-J4-GF_/ GF_-RJ, MR-J4-B_/ B_-RJ, MR-J4-DUB_/ DUB_-RJ, and MR-D01 - -

Protection coordination cable

MR-J3CDL05M

MR-J3CN1

MR-CCN1

Connector set

For MR-J4W_-B_ (Qty: 1 pc) For MR-J4W_-B_ (Qty: 20 pcs)

- -

MR-J2CMP2

MR-ECN1

For connecting power regeneration converter unit or resistance regeneration converter unit and drive unit

MR-J2CN1-A

-

For power regeneration converter unit

-

MR-CVCN24S

Servo support software Item

Application

Model

MR Configurator2 (Note 1)

Servo setup software for AC servo

SW1DNC-MRC2-E

Notes: 1. MR Configurator2 is included in MT Works2 with software version 1.34L or later, or GX works3. If you have MT Works2 with software version earlier than 1.34L or MELSOFT iQ Works, GX Works3, GX Works2, EM Software Development Kit, CW Configurator, MR Configurator2 is available for free download.

7-26