MELSERVO-J4

Options/Peripheral Equipment

Cables and Connectors for Servo Motor Electromagnetic Brake Refer to "Details of Option Connectors for Servo Motors" in this catalog for the detailed models. Item Model IP rating (Note 1) Application

Servo Amplifiers Rotary Servo Motors Linear Servo Motors Direct Drive Motors Options/Peripheral Equipment Product List LVS/Wires Cautions

Cable length

Description

2 m 5 m 2 m 5 m 2 m 5 m 2 m 5 m

MR-BKS1CBL2M-A1-H *1 MR-BKS1CBL5M-A1-H *1 MR-BKS1CBL10M-A1-H *1 MR-BKS1CBL2M-A1-L *1 MR-BKS1CBL5M-A1-L *1 MR-BKS1CBL10M-A1-L *1 MR-BKS1CBL2M-A2-H *1 MR-BKS1CBL5M-A2-H *1 MR-BKS1CBL10M-A2-H *1 MR-BKS1CBL2M-A2-L *1 MR-BKS1CBL5M-A2-L *1 MR-BKS1CBL10M-A2-L *1

For HG-KR/HG-MR (direct connection type)

Electromagnetic brake cable (Note 2) (load-side lead)

10 m

IP65

(41)

Electromagnetic brake connector

10 m

Lead-out

Electromagnetic brake cable (Note 2) (opposite to load-side lead) Electromagnetic brake cable (Note 2) (load-side lead) Electromagnetic brake cable (Note 2) (opposite to load-side lead) Electromagnetic brake connector set (Note 4) (one-touch connection type) Electromagnetic brake connector set (Note 3, 4) (screw type) Electromagnetic brake connector set (Note 4) (one-touch connection type) Electromagnetic brake connector set (Note 3, 4) (screw type)

For HG-KR/HG-MR (direct connection type)

10 m

IP65

(42)

* The cable is not shielded.

10 m

(43)

MR-BKS2CBL03M-A1-L

0.3 m IP55 For HG-KR/HG-MR (junction type)

Electromagnetic brake connector

Lead-out

(44)

MR-BKS2CBL03M-A2-L

0.3 m IP55 For HG-KR/HG-MR (junction type)

* The cable is not shielded.

For HG-SR/ HG-JR53B, 73B, 103B, 153B, 203B, 353B, 503B, 703B, 903B, 534B, 734B, 1034B, 1534B, 2034B, 3534B, 5034B, 7034B, 9034B (straight type) For HG-SR/ HG-JR53B, 73B, 103B, 153B, 203B, 353B, 503B, 703B, 903B, 534B, 734B, 1034B, 1534B, 2034B, 3534B, 5034B, 7034B, 9034B (angle type) For HG-JR601B, 801B, 12K1B, 701MB, 11K1MB, 15K1MB, 6014B, 8014B, 12K14B, 701M4B, 11K1M4B, 15K1M4B/ HG-UR202B, 352B, 502B (straight type)

(45)

MR-BKCNS1 *2

-

IP67

Electromagnetic brake connector

Applicable cable Wire size: 1.25 mm 2 (AWG 16) or smaller Cable OD: 9.0 mm to 11.6 mm

(46)

MR-BKCNS2 *2

-

IP67

(47)

MR-BKCNS1A *2

-

IP67

Electromagnetic brake connector

Applicable cable Wire size: 1.25 mm 2 (AWG 16) or smaller Cable OD: 9.0 mm to 11.6 mm

(48)

MR-BKCNS2A *2

-

IP67

Electromagnetic brake connector

(49) Electromagnetic brake connector set MR-BKCN

-

IP67

Applicable cable Wire size: 0.3 mm 2 to 1.25 mm 2 (AWG 22 to 16) Cable OD: 5.0 mm to 8.3 mm

Notes: 1. The IP rating indicated is for the connector's protection against ingress of dust and water when coupled to a servo amplifier/servo motor. If the IP rating of the servo amplifier/servo motor differs from that of these connectors, overall IP rating depends on the lowest of all. 2. -H and -L indicate a bending life. -H indicates a long bending life, and -L indicates a standard bending life. 3. A screw thread is cut on the electromagnetic brake connector of HG-SR/HG-JR series, and the screw type connector can be used. 4. The connector contains a plug and contacts. Using contacts for other plugs may damage the connector. Be sure to use the enclosed contacts. For unlisted lengths and fabricating cables *1. For unlisted lengths of the cables, please contact Mitsubishi Electric System & Service Co., Ltd. OVERSEAS BUSINESS PROMOTION DIVISION (Email: osb.webmaster@ melsc.jp) *2. For fabricating servo motor power cables or electromagnetic brake cables, please contact Mitsubishi Electric System & Service Co., Ltd. OVERSEAS BUSINESS PROMOTION DIVISION (Email: osb.webmaster@melsc.jp)

5-18