MELSERVO-J4

Options/Peripheral Equipment

Configuration Example for Servo Motors (Note 3) For MR-J4-GF-RJ/B-RJ/A-RJ and LM-H3/LM-K2/LM-U2 linear servo motor series with a serial linear encoder When using a junction cable for linear servo motor ●● A-RJ B-RJ GF-RJ

To servo amplifier power connector (CNP3/TE4) (Note 4)

Linear servo motor primary side (coil) Linear servo motor secondary side (magnet)

To servo amplifier encoder connector (CN2)

Power lead wires

THM SCALE

Junction cable

Thermistor lead wires

(17)

(21)

(Note 1)

(17)

To servo amplifier encoder connector (CN2)

Junction cable

Linear encoder

(6)

Linear encoder head cable

( 7 )

(22)

When not using a junction cable for linear servo motor ●●

To servo amplifier power connector (CNP3/TE4) (Note 4)

Linear servo motor primary side (coil) Linear servo motor secondary side (magnet)

Power lead wires

Thermistor lead wires

To servo amplifier encoder connector (CN2)

(Note 1)

(17)

Linear encoder

Linear encoder head cable

(Note 2)

(17)

To servo amplifier encoder connector (CN2)

(Note 1)

(17)

For MR-J4-GF-RJ/B-RJ/A-RJ and LM-F linear servo motor series with a serial linear encoder When using a junction cable for linear servo motor ●●

To servo amplifier power connector (CNP3/TE4/TE1/TE1-1) (Note 4)

Linear servo motor primary side (coil) Linear servo motor secondary side (magnet)

(Note 2)

Thermistor cable Power cable

To servo amplifier encoder connector (CN2)

THM SCALE

Junction cable

(17)

(Note 2)

(21)

(Note 1)

(17)

Linear encoder

To servo amplifier encoder connector (CN2)

Junction cable

(6)

Linear encoder head cable

( 7 )

(22)

When not using a junction cable for linear servo motor ●●

To servo amplifier power connector (CNP3/TE4/TE1/TE1-1) (Note 4)

Linear servo motor primary side (coil) Linear servo motor secondary side (magnet)

(Note 2)

Thermistor cable Power cable

(Note 2)

To servo amplifier encoder connector (CN2)

(Note 1)

(17)

Linear encoder

Linear encoder head cable

(Note 2)

(17)

(Note 2)

To servo amplifier encoder connector (CN2)

(Note 1)

(17)

Notes: 1. Contact the relevant linear encoder manufacturers for connectors to connect with the head cables. 2. Refer to "Products on the Market for Servo Motors" in this catalog for these connectors. 3. Cables drawn with dashed lines need to be fabricated by user. Refer to relevant Servo Motor Instruction Manual for fabricating the cables. 4. The connector for U, V, and W varies depending on the servo amplifier capacities. Refer to the dimensions of the relevant servo amplifier in this catalog for details.

5-9