MELSERVO-J4

Rotary Servo Motors

HG-JR 3000 r/min Series (Low Inertia, Medium Capacity) (400 V Class) Specifications Rotary servo motor model HG-JR 534(B)

734(B) 1034(B) 1534(B) 2034(B) 3534(B) 5034(B) 7034(B) 9034(B) Refer to "Combinations of Rotary Servo Motor and Servo Amplifier" on p. 2-6 in this catalog.

Compatible servo amplifier model MR-J4-

Power supply capacity *1

[kVA] [kW]

1.0 0.5

1.3

1.7 1.0

2.5 1.5

3.5 2.0

5.5

7.5 5.0

10

13

3.3 <3.5> (Note 4)

Rated output

0.75

7.0

9.0

Continuous running duty

10.5 <11.1> (Note 4) 15.9 22.3 28.6

Rated torque (Note 3)

[N•m]

1.6

2.4

3.2

4.8

6.4

4.8 <6.4> (Note 5)

7.2 <9.6> (Note 5)

9.6 <12.7> (Note 5)

14.3 <19.1> (Note 5)

19.1 <25.5> (Note 5)

32.0 <44.6> (Note 5)

47.7 <63.7> (Note 5)

66.8 <78.0> (Note 8) 85.8

Maximum torque

[N•m] [r/min] [r/min] [r/min]

Rated speed

3000

Maximum speed

6000 6900

5000 5750

Permissible instantaneous speed

Standard

[kW/s] 16.7 27.3 38.2 60.2 82.4 83.5 [kW/s] 12.5 22.0 32.2 53.1 74.8 71.6

133 119

115

147 125

Power rate at continuous rated torque Rated current

With electromagnetic brake

93.9

8.3 <8.8> (Note 4) 26 <36> (Note 5) 75 <98> (Note 5)

[A]

1.5

2.8

2.8

5.4

5.4

14

17

21

4.5 <6.0> (Note 5) 99 <100> (Note 5)

8.4 <12> (Note 5) 72 <489> (Note 5)

8.4 <12> (Note 5) 56 <382> (Note 5)

17 <22> (Note 5) 265 <275> (Note 5)

17 <22> (Note 5) 203 <209> (Note 5)

41 <54> (Note 5) 68 <89> (Note 5, 9)

52 <69> (Note 8)

Maximum current

[A]

67

Regenerative braking frequency *2

56 (Note 9)

205 (Note 6, 9)

MR-J4-

[times/min]

[× 10 -4 kg•m 2 ] 1.52 2.09 2.65 3.79 4.92 13.2 19.0 43.3 55.8 [× 10 -4 kg•m 2 ] 2.02 2.59 3.15 4.29 5.42 15.4 21.2 52.9 65.4

Standard

Moment of inertia J

With electromagnetic brake

Recommended load to motor inertia ratio (Note 1)

10 times or less

Speed/position detector

Absolute/incremental 22-bit encoder (resolution: 4194304 pulses/rev)

Oil seal

Attached

Thermistor

None

Insulation class

155 (F)

Structure

Totally enclosed, natural cooling (IP rating: IP67) (Note 2)

Ambient temperature Ambient humidity

Operation: 0 °C to 40 °C (non-freezing), storage: -15 °C to 70 °C (non-freezing) Operation: 10 %RH to 80 %RH (non-condensing), storage: 10 %RH to 90 %RH (non-condensing) Indoors (no direct sunlight); no corrosive gas, inflammable gas, oil mist or dust

Ambience

Environment *3

Altitude

2000 m or less above sea level (Note 7)

X: 24.5 m/s 2 Y: 29.4 m/s 2

Vibration resistance *4

X: 24.5 m/s 2 Y: 24.5 m/s 2

Vibration rank

V10 *6

Compliance with global standards

Refer to "Compliance with Global Standards and Regulations" on p. 55 in this catalog.

L

[mm]

40

40

40

40

40

55

55

79

79

Permissible load for the shaft *5

Radial Thrust

[N] [N]

323 284 3.0 4.4

323 284 3.7 5.1

323 284 4.5 5.9

323 284 5.9 7.3

323 284 7.5 8.9

980 490

980 2450 2450

490

980

980

Standard

[kg] [kg]

13 15

18 20

29 35

36 42

Mass

With electromagnetic brake

Notes: 1. Contact your local sales office if the load to motor inertia ratio exceeds the value in the table. 2. The shaft-through portion is excluded. Refer to the asterisk 7 of "Annotations for Rotary Servo Motor Specifications" on p. 2-39 in this catalog for the shaft-through portion. 3. When unbalanced torque is generated, such as in a vertical lift machine, keep the unbalanced torque of the machine under 70% of the servo motor rated torque. 4. The value in angle brackets is applicable when the servo motor is combined with MR-J4-500GF4(-RJ)/MR-J4-500B4(-RJ)/MR-J4-500A4(-RJ) servo amplifier. 5. The value in angle brackets is applicable when the maximum torque is increased with a combination with a larger-capacity servo amplifier. Refer to "Combinations of HG JR Servo Motor Series and Servo Amplifier (200 V/400 V Class) for Increasing the Maximum Torque to 400% of the Rated Torque" on p. 2-7 in this catalog for the available combinations. 6. This value is applicable when the external regenerative resistors, GRZG400-_Ω (standard accessory) are used with cooling fans (two units of 92 mm 5 92 mm, minimum airflow: 1.0 m 3 /min). Note that [Pr. PA02] must be changed. 7. Refer to "Servo Motor Instruction Manual (Vol. 3)" for the restrictions when using the servo motors at altitude exceeding 1000 m and up to 2000 m above sea level. 8. The value in angle brackets is applicable when the servo motor is combined with MR-J4-DU900B4(-RJ) drive unit, and the maximum torque is increased with a parameter setting. 9. This value is applicable when the servo motor is combined with MR-J4-_GF4(-RJ)/MR-J4-_B4(-RJ)/MR-J4-_A4(-RJ) servo amplifier. Contact your local sales office for the regenerative braking frequency with MR-J4-DU900B4(-RJ) drive unit. Refer to "Annotations for Rotary Servo Motor Specifications" on p. 2-39 in this catalog for the asterisks 1 to 6.

2-23