Hoffman On Demand

Wire and Cable Management Lay-In NEMA Type 12

Wire and Cable Management Lay-In NEMA Type 12

Catalog Number

D (in.)

E (in.)

Catalog Number

Fits Height (in.)

Fits Width (in.)

BOX CONNECTOR

90-DEGREE ANGLE SEALING PLATE

F44LB 5 38 Each sealing plate also includes one gasket and one set of screws to join sections 5 38

F44LSAG 4 00 Each sealing plate also includes one gasket and one set of screws to join sections 4 00

TOC

TOC

When wireway enters an enclosure, a box connector should be used on the inside of the enclosure to ensure a tight seal. BULLETIN: F10

Hanger is used to support a wireway run. Plate includes a flange gasket and flange screws, not shown in drawing. BULLETIN: F10

5

5

Catalog Number

W (in.)

BARRIER KIT, BOLT-ON

Catalog Number

A x B (in.)

QUICK-RELEASE FLAT SEALING PLATE

F44BK60

3 00

F44LSGQR 4 00 x 4 00 Each sealing plate also includes one gasket and one set of screws to join sections

Divides wireway into two or more compartments. Barriers are fastened to wireway sections with screws. Sealing washers are included. BULLETIN: F20

This exclusive HOFFMAN-designed hinged sealing plate permits quick and easy access to the wireway interior without using a tool. BULLETIN: F10

GASKET AND SCREWS

Standard packages of wireway contain one gasket and one set of screws to join sections, except Cross Fittings which contain three of each, Tee Fittings which contain two of each and Telescope Fittings which contain none. Additional gasket and screw sets may be ordered by catalog number. BULLETIN: F20 Catalog Number F44WG

Catalog Number

W (in.)

BARRIER KITS, BRACKET-MOUNTED

F44BB2C

3 00

Package consists of five brackets.

Spring steel brackets hold barriers in place by friction fit inside wireway. Order barrier and bracket separately. Recommended spacing in increments of 3 ft. BULLETIN: F10

87797154

80

Industrial Wireway

nVent.com/HOFFMAN

PH 763.422.2211

Industrial Wireway

81

SUBJECT TO CHANGE WITHOUT NOTICE

nVent.com/HOFFMAN