Altivar Solar Variable Speed Drives Catalog

Variable speed drives Altivar Solar Communication buses and networks

Presentation

Presentation Altivar Solar drives are designed to meet the configuration requirements found in the main industrial communication installations. The Modbus and CANopen communication protocols are integrated as standard and can be accessed directly via the RJ45 communication port located on the front of the book control block drive and underneath the front door of the compact control block drive. Altivar Solar variable speed drives can also be connected to other industrial communication buses and networks by using one of the communication modules available as an option. Communication modules are supplied in “cassette” format for ease of mounting and removal. Modbus serial link (1) The Modbus serial link is used for connecting the following HMI and configuration tools: b Harmony HMI terminal

b Remote display terminal, remote graphic display terminal b SoMove setup software and multi-loader configuration tool

CANopen machine bus (1) The CANopen machine bus is used for integration into control system architectures, especially when combined with Modicon M241 and M251 logic controllers or Lexium 32 motion controllers.

Communication modules for industrial applications (2) The following communication modules are available: b Modbus TCP and EtherNet/IP b PROFIBUS DP V1

b DeviceNet b EtherCAT b POWERLINK b PROFINET

(1) The Modbus serial link always uses the RJ45 communication port. If simultaneous use of the Modbus serial link and the CANopen machine bus is required, a CANopen communication module is needed. (2) The Altivar Solar drive can only take one communication module.

References: page 14

Options: page 18

Combinations: page 25

Motor starters: page 36

Dimensions: page 38

30