Altivar Solar Variable Speed Drives Catalog

Variable speed drives Altivar Solar Dialog and configuration tools

Presentation, references (continued)

Accessories for graphic display terminal Door mounting kit for mounting on enclosure door with IP65/UL Type 12 protection rating as standard The kit comprises: - Tightening tool (also sold separately under the reference ZB5AZ905 ) 1 Cover plate to maintain IP65 protection when there is no terminal connected 2 M ounting plate 3 RJ45 port for the graphic display terminal 4 Seal 5 Fixing nut 6 Anti-rotation pin 7 RJ45 port for connecting the remote-mounting cordset (10 m/ 33 ft maximum) Cordsets should be ordered separately depending on the length required. 8 Grounding connector Drilling a hole with a standard Ø 22 tool, as used for a pushbutton, allows the unit to be mounted without the need for a cut-out in the enclosure (Ø 22.5 mm/ Ø 0.89 in. drill hole). References Description Length m/ ft IP Reference Weight kg/ lb Door mounting kit – VW3A1112

1

3 2 4

Door mounting kit for mounting graphic display terminal on enclosure door (front panel)

65/ UL Type 12

–

A remote mounting cordset VW3A1104R ppp is required

1 2 4 5 6 7 8

Tightening tool For door mounting kit

ZB5AZ905

–

–

0.016/ 0.035 0.050/ 0.110 0.150/ 0.331 0.250/ 0.551 0.500/ 1.102 0.200/ 0.441

Remote-mounting cordset Equipped with two RJ45 connectors

VW3A1104R10

1/ 3.28 3/ 9.84 5/ 16.4 10/ 32.8

–

VW3A1104R30

–

VW3A1104R50

–

VW3A1104R100

–

Door mounting kit for graphic display terminal (rear panel)

Kit for deport the Ethernet RJ45 port on the front face of the drive (1) Ø 22 RJ45 female/female adapter with seal –

VW3A1115

65

Configuration tools Connection accessories Description

Length m/ ft

Reference

Weight kg/ lb

SoMove setup software For configuring, adjusting, and debugging the Altivar Solar drive USB/RJ45 cable Equipped with a USB connector and an RJ45 connector For connecting a PC to the drive

–

(2)

–

TCSMCNAM3M002P

2.5/ 8.2

–

(1) Graphic display terminal used only as a handheld terminal. (2) For drive and graphic display terminal firmware compatibility, please refer to the ATV320 Programming Manual.

References: page 14

Combinations: page 25

Communication: page 30

Motor starters: page 36

Dimensions: page 38

24