Altivar Solar Variable Speed Drives Catalog

Variable speed drives Altivar Solar Integrated EMC filters

Presentation (continued)

The offer (continued) Integrated EMC filters Altivar Solar drives with built-in EMC filter:

b ATV320 ppp M2C412 b ATV320 ppp N4C412 The EMC filter enables compliance with standard IEC/EN 61800-3, category C2 or C3 in environment 1 or 2 and the European Electromagnetic Compatibility Directive (EMC). Drive Maximum length of shielded cable (1)(2) according to IEC/EN 61800-3 Category C2 IEC/EN 61800-3 Category C3 m/ ft m/ ft ATV320 ppp M2C412 ATV320U04N4C412 ... U15N4C412 10/ 33 10/ 33 ATV320U22N4C412 ... U40N4C412 10/ 33 20/ 66 ATV320U55N4C412...U75N4C412 2/ 6.6 20/ 66 ATV320D11N4C412...D15N4C412 _ 30/ 98 (1) If motors are connected in parallel, it is the total cable length that should be taken into account. (2) The maximum motor cable length is at 4 kHz switching frequency. EMC standard description IEC 61800-3 Category C1 C2 C3 C4 Environment First environment First or second environment (user choice) Second environment Supply voltage/current < 1,000 V – – > 1,000 V, or > 400 A, or IT supply network Knowledge and requirements No requirements Installation and commissioning by EMC expert only EMC plan required –

EMC standards Catergory

Subcategory Radiated noise

Test standard

Emission

CISPR11 (EN 55011)

Conducted noise

CISPR11 (EN 55011)

Immunity

Electrostatic discharge (ESD) test

IEC 61000-4-2

Radiated, radio-frequency, electromagnetic field

IEC 61000-4-3

Electrical fast transient (EFT)/burst transients test

IEC 61000-4-4

Electrical surge test IEC 61000-4-5 Immunity to conducted disturbances induced by radio-frequency fields IEC 61000-4-6 Voltage dips, short interruptions of power IEC 61000-4-11

IEC 60068-2 Description

Test and endurance standards

Temperature test

IEC 60068-2-2 IEC 60068-2-6 IEC 60068-2-27 IEC 60068-2-29

Vibration test

Shock test Bump test

References: page 14

Options: page 18

Combinations: page 25

Motor starters: page 36

Dimensions: page 38

11